007 / Service
Fire Detection System Inspection under SI 1220 Part 11
Periodic fire detection system inspection — panel, detectors, call points and activations — with computerized documentation, fault diagnosis and Form 4 under SI 1220 Part 11.
What the service includes
What the inspection includes
Coordination and information gathering
Understanding the type of system, existing plans and previous reports before arriving on site.
Panel inspection
Checking the control panel, alerts, event log, and the power and backup sources.
Detectors, call points and sounders
Activating and testing detectors, call points and sounders in the designated zones.
Activations and interfaces
Checking that the system triggers what it is supposed to — PA, doors and other systems.
Computerized documentation
Recording the findings on site and filling in Form 4 under SI 1220 Part 11.
Closing faults
Presenting the faults, repairing them and re-testing until the process is closed.
How we work
A clear, computerized and documented inspection process.
From preparing the documents to keeping the inspection reports for the customer.
-
Coordination
Date, access to the building and collecting documents.
-
On-site inspection
Checking the panel, detectors and activations.
-
Findings report
Details of the faults and the order of priority.
-
Repair and closure
Handling faults, re-testing and documentation.
What you get at the end of the inspection
A clear status report — and a plan for what's next.
At the end of the inspection you will know the state of the system, which faults were found and the order of priority for dealing with them. That way the repairs can be planned in advance, rather than discovered on the day of the audit.
What a periodic fire detection system inspection includes
SI 1220 Part 11 deals with the periodic inspections of fire detection systems and the requirements for maintaining them. In practice, a fire detection system inspection examines three things: that the panel is working and reporting correctly, that the detectors and call points respond in every zone, and that the activations the system is supposed to perform — sounders, emergency PA, door release and other systems — actually take place.
Testing smoke detectors, the panel and power sources
During the inspection we activate detectors in all zones, test the manual call points and the sounders, and check the power supply and the panel’s backup batteries. Every finding is documented on site, so at the end it is clear what is in order, what needs attention and in what order.
After the inspection: faults, repair and Form 4
When faults are found, the same team can handle them — see fault repair — and carry out a re-test. The form for reporting fire detection system maintenance (Form 4) and the other official forms can be found in the fire department forms library. We inspect fire detection systems for businesses and institutions in the North — from Netanya and Hadera, through Haifa, Afula and Nof HaGalil, to Kiryat Shmona and the Golan Heights.
Useful documents and links
Fire Department Forms Library
Official forms for reporting and documentation, including Form 4 for fire detection system inspection under SI 1220 Part 11. Direct download of PDF files from a government source.
From the field
From our work.
Computerized inspection records on site
We check and document at every stage.
Illustrations created for the website — not photos of technicians, equipment or inspections actually carried out.

Frequently asked questions
Frequently asked questions about fire detection system inspection
What is the difference between an inspection and maintenance?
An inspection examines the state of the system at a point in time and documents it; maintenance is ongoing care meant to keep the system in working order between inspections. The two can be combined — see fire system maintenance.
What do I need to prepare for the inspection?
Access to the panel and to all areas of the building, and if available — the system plans and previous reports.
What happens if faults are found?
You receive a list of the faults and a repair proposal. After the repair we carry out a re-test and document the closure.
Where can I find Form 4?
In the fire department forms library on our site, together with the other official forms.
How often does a fire detection system need to be inspected?
The frequency of inspections and maintenance is set by SI 1220 Part 11 and by the licensing or insurance requirements of the business. We’ll check what applies to you and suggest a suitable schedule.
Which areas do you carry out fire detection inspections in?
Across the North — from Netanya and Hadera, through Haifa, Afula and Nof HaGalil, to Kiryat Shmona and the Golan Heights.
Need an inspection for your fire detection system?
Tell us about the type of building and its location, and we'll schedule a date.