Fire and smoke detection / Tool

Electrical Panel Extinguishing Calculator

Enter the dimensions of the electrical cabinet, choose aerosol or gas, and get the amount of suppression agent needed for the panel's volume — according to the formulas of SI 5210 and SI 1597.

1Electrical cabinet dimensions

External dimensions of the cabinet, in centimeters.

2Type of suppression
3Aerosol data

A value set by the manufacturer for each model, already including a 1.3 safety factor. If you don't know it, leave the default.

Good to know

Using the calculator does not replace advice and design by a qualified professional. The result is an initial estimate only: the final amount depends on the manufacturer's data for the unit, the panel's construction and openings, and the Fire and Rescue Authority requirements for the business. For any question you can contact us by phone or WhatsApp.

Our expert Eyal Shahar

Here for you

We'll check the panel, the fire department requirements for the business and the right type of suppression, and get back to you with a detailed proposal. You can call or send a message.

How it's calculated

The formulas behind the calculator.

In both methods the starting point is the panel volume: height × width × depth.

Aerosol · SI 5210

m = d × V

  • m — the required aerosol mass, in grams.
  • d — the generator's design density, in g/m³. The manufacturer determines it in tests, and it includes a 1.3 safety factor.
  • V — the panel volume, in m³.

Choose a generator, or several generators, whose total mass is not less than the result.

Suppression gas · SI 1597

W = (V ÷ S) × C ÷ (100 − C)

  • W — the required gas weight, in kg.
  • V — the panel volume, in m³.
  • C — the design concentration, as a percentage of the volume.
  • S — the specific volume of the gas vapour, in m³/kg: S = k1 + k2 × T, where T is the minimum temperature in the panel. For FM-200: 0.1269 + 0.000513 × T. For Novec 1230: 0.0664 + 0.000274 × T.

SI 1597 is based on the American standard NFPA 2001, from which the formula comes.

← Back to “Fire and Smoke Detection System Installation”

WhatsApp